Release Notes for SNMP QUCM Application
---------------------------------------
25Apr11 - Added PM750. KDC

27Jan11 - Redid CM4 alarm number blocking.  Was reporting wrong alarm numbers above #80. KDC

13Jan11 - Fixed alarm numbering mismatch for CM4's and their traps. KDC

26Jun09 - QUCM now gets Incremental time from its own clock for Enercept and Energy Meter. KDC

25Jun09 - Added bug check for EGX sending NAK when bad parity received.  Added clock check for CM4 and PM8.  Removed ReadID code. KDC

23Jun09 - Added Energy Meter.

03Feb09 - Added PM800. Removed RTU Slave.

07Aug07 - Fixed incorrect OIDs on all Powerlogic entries.  New MIB!

31May07 - Modbus RTU Master port now set for 2-wire RS-485 support.

04Apr07 - Fixed Sub trap limits for PowerWare UPS.

03Apr07 - Added Sub trap limits for Franz.

28Feb07b - MCM Neutral Current forced to N/A if x7fffffff.

28Feb07a - MCM powerfactor * 1000 before converted to integer.

28Feb07 - Changed MCM read size to 56 from 60.

06Dec06 - Removed readid on datechange.4

05Dec06 - Added MGE UPS.

26Oct06 - Added Powerware UPS.
          New web server.

11Apr06 - Added MGE STS, Veris MCM, and Veris BCM.
          New powerlogic.mib file.
	  
01Jul05 - Added setting of serial port timeout to web page.
          New default is 2000mS while old was fixed at 5000mS.

08Sep04 - Added support for CM4000 alarms.
          Fixed CM4000 Voltage A-N reading.

22Nov02 - Added optional scaling of power on brief summary index 202.

19Jun02 - New compiler and runtime.
          Fixed Modbus/TCP driver to use global sockets.
          Removed debugging telnet server.

02Apr02 - Fixed the Modbus RTU Slave serial modes.
          Added second brief summary on index 202.

13Mar02 - Added single link to mark all units out of service.
          Fixed display problems on summary pages.

20Feb02 - Fixed autodetection of building and ecm counts.

18Feb02 - New runtime firmware and compiler.

05Oct01 - Fixed Password timeout issue.

14Aug01 - Added CM250 to list of supported devices.
          Added 255 slave address access on Modbus/TCP connections.

16Apr01 - Added IP detection of configuration password.

10Apr01 - Fixed offset in brief push.  Added IP display for Mbus/TCP servers.

09Apr01 - Changed Modbus Brief push to include all 60 meters.

05Apr01 - Fixed SNMP community configuration.  SNMP may now be disabled
	  to gain a Modbus/TCP server socket.  New QUCMTCPL.FWL must be
	  loaded.  Added FTP Server for storage of configuration.

26Mar01 - Fixed Demand reading alignment.  Split large Reads into multiple
	  queries on CM2 and PM.  Added CM2 Alarm summary and traps.

21Feb01 - Added SNMP Support and brief summary on Modbus/TCP index 201.

17Jan01 - Fixed device 1 config problem.  Fixed IE table display.

16Jan01 - Added Enercept Meter.

09Jan01 - First release of completely overhauled data structure.